MobileVoiceRTP (VoIP) A VideoPhone
Its not H.323 or SIP. This is a peer-to-peer soft phone which can operate in
802.11a/b/g or Wired LAN mediums. Device must be enabled with: Touch Screen,
Speaker, Microphone and Network Card. Product supports and interoperates on all
platforms of Windows CE and corresponding processor builds. (CE 2.11 to CE 6.0 including H/PC
Pro, and HPC 2000) This softphone operates in either true Streaming
mode or a Push-To-Talk interface. This is an HP DSP Logoed product.
If two users have
broadband or DSL and an 802.11 Access Points they can converse over the
internet while sitting in their back yards. (requires use of a port forwarding
router).Your first purchase provides two serial numbers so you can use it with a peer device
instantly. Each additional purchase provides a single device. ($40 USD)
2.0 Release Software Features:
GSM 6.10, PCM Codecs Supported
VOX/VAD Support for both GSM and PCM codecs
Full Duplex**, Half Duplex Support
Streaming Mode, Push-ToTalk Mode
1, 2 bit Monochrome Real Time Video Support [14 Frames Per Second] ***
4, 8, 16, 24 bit Color Video Support [2 - 5 Frames Per Second]***
Video Compression and Variable Bitrate Adjustment
Caller Identification, Caller Decline Options
User Call List Database
Customizable Ringer Sounds
Silent Ringer Mode, Vibrate
Auto Discovery of all phones in the network
Hardware Program Keys or Touch Screen can trigger the PTT Process
Customizable GUI
Auto Answer/Auto Hangup - allows remote monitoring/surveillance
Voice Supported on all WinCE/WinMobile Devices and processors
hp iPAQ 3700, 6300, Photosmart SDIO, Video Support
Unitech MT 380 Tashi Video Support
Video Supported on any WinCE device which works with the HP Photosmart SDIO Camera
[requires SDIO slot]
QVGA, VGA Support
User and Network Administrators Guide (28 pp)
** Full Duplex Stream a headset and microphone are recommended
*** The higher the clock speed the better the
video frame rate
Device Support
Palm PC 2.11 ( SH3, MIPS )
Handheld PC Pro 2.11 ( ARM, MIPS, SH3, SH4 )
Handheld PC 2000 ( ARM, MIPS, X86 )
Pocket PC ( ARM, MIPS, SH3 )
Pocket PC 2002 ( ARM, X86 )
Pocket PC 2003 - CE.NET ( ARMV4 )
Pocket PC 2003 - Smartphone ( ARMV4 )
Unitech MT380 - CE 5.0 ( ARMV4 )
Mobile 5.0 Smartphone ( ARMV4 )
Mobile 5.0 Pocket PC ( ARMV4 )
Mobile 6.0 Professional ( ARMV4 )
Mobile Imager SDK for the Symbol MC 50
The Mobile Imager SDK is a toolkit which allows you to quickly develop point
and shoot camera applications using Pocket Internet Explorer (PIE). The toolkit
consists of an ATL/COM Control and an HTML/JScript page which you may modify in
order to create custom solutions. The Control lets you preview, capture and
upload images to a Web Server via either FTP (File Transfer Protocol) or
HTTP-PUT (RFC-2068). No server scripting (.ASP or .ASPX) or web page is
required for the upload process. Your web server needs only a designated upload
directory which should be configured for secure access. Additionally the
control gives you both aural alerts and a visual progress bar during the upload
process. The feature functionality of this control lets you create scriptable
client side applications using Pocket Internet Explorer. Which in turn allows
you to rapidly build Web based applications using the preferred security safe
HTTP or FTP protocols. This is a Symbol ISV Logoed Product.
Note, this will run on any MC 50 compatible imaging engine, like the MC 70.
The retail toolkit sells for $250 USD. Download the free trial version for
a test drive. Software Features:
1144 by 880 Image Resolution Images (1.1 Megapixel)
Preview Mode Operates at 7.5 FPS
FTP or HTTP-PUT (RFC 2068) No server side script coding/page is required
Allows Rapid Development of Web Applications
No need to develop thick client applications to access the camera hardware
No need to develop elaborate programming to access the camera hardware
Proxy Hosts Supported
Progress Status Bar During File Upload
Programmable Aural Alerts During File Upload
Client HTML/JScript provided
Preview, Snapshot and Upload Modes
Developers Guide
MobileIntercom (VoIP)
Its not H.323 or SIP. This is a peer-to-peer soft phone which can operate in
802.11a/b/g or Wired LAN mediums. Device must be enabled with: Touch Screen,
Speaker, Microphone and Network Card. Product supports and interoperates on all
platforms of Windows CE and corresponding processor builds. (including H/PC
Pro, HPC 2000 *). This phone is designed for low power consumption.
Please note the following: this software uses "record and send" technology.
Functionally it works like an intercomm and not a true phone ! Using a
Push-To-Talk interface, once understanding the ergonomics of PTT, users will
like the added feature of being able to converse with each other without
requiring a car battery or a rack of lithuim ion packs like SIP or H.323
demand. This is an HP DSP Logoed product. If two users have broadband or
DSL and an 802.11 Access Points they can converse over the internet while sitting in their back yards.
(requires use of a port forwarding router)
Your first purchase provides two serial numbers so
you can use it with a peer device instantly. Each additional purchase provides
a single device. ($35 USD)
5.0 Release Software Features:
Caller Identification, Caller Decline Options
User Call List Database
Customizable Ringer Sounds
Silent Ringer Mode, Vibrate
Auto Discovery of all phones in the network
Push To Talk
Hardware Program Keys or Touch Screen can trigger the PTT Process
Lowest Power Consumption Possible (only transmits when sending voice.)
